Flame Detector

FS SYSTEM10™ multi-spectral digital photoelectric infrared flame detector for liquid and powder coating applications

FS SYSTEM10™
  • FS SYSTEM10™
Product details
*Product model/number: FS SYSTEM10™
FS SYSTEM10™ is a high-speed, microprocessor-based fire detection and control system. Designed for liquid and powder coating applications, it can quickly detect flames and stop electrostatic painting in milliseconds when flames are detected, and can effectively interrupt flames before residues and wet paint films ignite.

Product Specifications:
• Multispectral infrared flame detector
• Comply with NFPA33 requirements (NFPA: National Fire Protection Association)
• Unique two-level "Warning" and "Fire Alarm" responses • No failure alarm due to arc discharge and corona discharge
• Built-in fully automatic "internal photometric" self-test
• No false alarms for radiant energy sources such as paint heaters
• Not affected by liquid spray booths, fumes or paint solvent mist
• Not affected by paint, powder and residual oil on the lens
• Use RS-485 interface for digital communication
• FirePic™: historical fire archive data retrieval
• Snapshot™: Dynamic icon display of the situation detected by the detector
Related Products
FS SYSTEM10™
FS24X multi-spectral tri-frequency infrared flame detection, 110° full cone view
(IR/IR/IR/Visible) flame detector
FS SYSTEM10™
FS20X multi-spectral ultraviolet/dual frequency infrared/visible light flame detector, 90° full cone view
(UV/IR/IR/Visible) infrared flame detector
FS SYSTEM10™
SS4 UV/IR photoelectric digital flame detector, 120° full cone view
(UV/IR/Visible) flame detector
FS SYSTEM10™
FS7 photoelectric flame detector, especially suitable for fire protection in clean room of semiconductor industry, vertical & horizontal 120° angle
It is especially suitable for fire protection in the clean room of the semiconductor industry. It adopts wide-band infrared, narrow-band infrared, and visible multi-spectral optical technology. It is especially used in the Fire Sentry FS7 flame detector for the protection of semiconductor clean rooms.
The FS7 flame detector provides two levels of intelligent response to the wet console flame in the semiconductor industry.
First-level warning: The first-level reaction indicates a small fire accident, the thermal energy exceeds 3KW (equivalent to a 4 inch diameter polypropylene fire), wait for a period of time, and judge whether it can extinguish itself.
Secondary alarm: If the flame cannot extinguish on its own and exceeds the factory set 13KW (equivalent to an 8-inch diameter polypropylene fire), the detector initiates a secondary response.
FS SYSTEM10™
FSL100 multi-series flame detector. The minimum horizontal and vertical directions are 90°
FSL100 series flame detector (UV/UVIR/IR3)
It can detect all kinds of flames safely, quickly and reliably, and has a wide range of uses.
FSL100 series flame detector family includes ultraviolet flame detector, ultraviolet/infrared and tri-band infrared flame detector.
The above-mentioned detectors all detect flame quickly through accurate Sensor and signal analysis, and at the same time can prevent false alarms.
The FSL100 series flame detector is small and light, easy to install, and can be used in various harsh environments such as indoor and outdoor or environments with explosion risk.
The FSL100 series flame detector has a large viewing angle and can detect various types of flames, including hydrocarbon and non-hydrocarbon flames.
There are three models of ultraviolet, ultraviolet infrared and tri-band infrared to meet your various application needs.
BackBack